JACK ZHU 2024-06-18 08:59:37

供应Introduction to the angle sensor of the intake manifold flow channel controller

IGS-IMRC03 (Automotive intake manifold control) electronically controls the opening or restriction of the engine"s intake duct based on the engine"s load and speed. At low engine speeds, IMRC03 is in a closed state, allowing less air to enter the engine and resulting in lower fuel consumption. At high engine speeds, IMRC03 will open the valve, increasing the amount of air entering the engine, thereby increasing the engine"s power output. In this way, we oid unnecessary fuel waste in idle mode by controlling the intake volume of the intake manifold, thereby achieving the goal of energy conservation and emission reduction.

Technical parameters of angle sensor for intake manifold channel controller

Model: IGS-IMRC03

Input voltage: 13.8 ± 0.05 VDC

Measurement object: angle

Opening angle: 30 ± 3 °

Closing angle: 120 ± 3 °

Response time at room temperature: 0.41 ± 0.03s Full temperature range: 0.41 ± 0.05s

Service life: More than 50000 forward and reverse cycles

Salt spray requirements: neutral salt spray test, no white rust for 48 hours; 72 hours without red rust

Working temperature: -40 ℃~125 ℃

Storage temperature: -40 ℃~125 ℃



Application field of angle sensor for intake manifold channel controller

The main function of the intake manifold flow controller (IMRC03-03) product is to control the rate of intake air. IMRC can adjust the opening angle of different proportions to achieve different intake rates at different speeds.